Barrels Swedish Mauser, K98, Lee Enfield, new VZ24 barrel 7.92x57, Remington 742+ bolt head , Ruger (can fit to Remington 700) Musgrave, new Tikka

A) factory new (retail over $300) Tikka For T3/T3x barrel tenon thread 1"-16 TPI 243 win 22” twist rate 1:10 these also can fit M55 Tikka rifles T3X M595 M558 also Sako 85 and 90 + Tikka T3X . The 1”-16 can  machined to small ring mauser $140 

B) Sturm Ruger 22-250 heavy barrel 26” excellent bore $170

D) short fat barrel in 9.3x57 Husqvarna small ring 96 x 18, with front sight, rear sight base, sling loop, some darkness by lands $40

E) Husqvarna 9.3x57 dark bore 19.7” has rear base with threaded stock retainer $35

F) New, never installed, spare part VZ24 barrel (large ring K-98) with Czech lion, 1946 date, cancelled waffenamdt. $430 note I have a VZ24 stock for sale as well

G) for K-98 large ring action. This is an excellent small ring mauser 6.5x55 barrel 24.3” with threaded muzzle made by adapting a large ring stub (threaded and brazed). $185

H) is a two groove cut to 23.5”  with sharp lands but very fine pitting in latter 1/4 of barrel, I expect good accuracy once 5 rounds fired to smooth out . $30

I) Swedish M96 in 6.5x55 25.7” with bright bore but modest throat wear. Still attached to receiver so you will need to take that off. If wanted I will saw receiver short.  $20

J) No.1MkIII very early 303 barrel with zero acceptance stamps only a serial number with no letter. 25.2 “ five groove  five digit serial number good bore $75. Might have been from a commercial rifle

K) Musgrave 26” heavy target barrel .308 with 1 1/16” x16 tenon so will fit Remington 700 with counterbore added and shoulder moved a bit forward. $150

L) Mossberg 464 30-30 length 20.3” mint bore $50

M) Mauser 7x57  length 23.5”, sharp bore some darkness $135SOLD

N) Remington 742 semi auto 30-06 with front sight base and drilled tapped for rear sight with factory blanking screws present excellent bore 22.7” including locking breech extension muzzle of about 1.2". Date code PF for 1967 Slender profile at rear sight holes, 0.756” did. This generation used the bolt head as in last photo $115

O) Remington 742 semi auto .308 length 19.7” (18.5 muzzle to rear of chamber, plus the breech locking extension is another 1.2”). The muzzle is a fat .657”. At rear sight holes, 0.779” - I think this is a heavy barrelled version. Excellent  bore with sight base and drilled for rear sight with factory blanking screws present Date code VL6 is 1964 fits bolt $85

P) bolt head and carrier Remington 742 $135

Send your postal code for a postage quote. 

I avoid bargaining and instead I start at a good price lower price with tim