Kahles 525i and spuhr

Category: Optics Rifle Scopes

Less than a year old. Was mounted in the spuhr mount and saw 115 rounds go down range. Absolutely perfect condition on scope and mount. I have a couple and have decided to sell one. Scope has oversize throw lever and oversized parallax ring installed. All manufacturer specs on both the mount and scope pasted below as well as pictures. No trades, lowball offers will be ignored. If the add is up, it is for sale. Scope $4500. Mount $550.

Kahles K525i 5-25x56 - CCW - SKMR3 - Right - 10644
The K525i combines maximum optical performance and precision with unique handling and ergonomics.
Features & Design:

Maximum optical performance - field of view, high contrast image, high definition
Absolutely reliable repeat accuracy.
Precise, clearly defined click mechanism
Parallax wheel integrated into the elevation turret (patented) (20 m to 8)
Innovative TWIST GUARD windage (patented)
Precise illuminated reticle in 1 st focal plane
SKMR Reticle
34 mm Main tube
The Zero Stop or mechanical stopping point is 3 or 4 clicks below the zero indicator

Tech Specs at a Glance:
Magnification Range: 5 to 25x
Field of View: 25.2 - 5.2 in/100 yds
Objective Diameter: 56mm
Eye relief: 3.74 inch
Illuminated Reticle: Yes
Reticle Position: First Focal Plane
Parallax adjustment: Yes 20m - infinity
Turret Adjustment Increments: .1 Mil
Max Elevation / Windage: 29 / 13 Mil
Tube Size: : 34mm
Length: 377 mm / 14.8 in
Weight: 35 oz

SPUHR - Picatinny Mount Integrated Bubble Level - 34mm Tube - 1.18" Height - 0 MOA / 0 MIL - Flat Dark Earth - SP-4001:
The ideal scope mount system series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to prevent canting of the rifle.

The rings are diagonally cut for increased visibility of the elevation and windage turrets (US Patent 8,733,011). The mounts are machined from billet 7075 T651 aluminum and all aluminum parts are hardcoat anodized. The Torx 20 ring and clamping screws are zinc-nickel coated for corrosion resistance. The screws come pre-waxed from the factory to ensure proper torque values.

The SP-4001 is designed for use on rifles with MIL-STD-1913 or STANAG 4694 rails, and is especially suitable for bolt action rifles with 1-piece Picatinny rails. The SP-4001 will fit most 34 mm scope tubes except for scopes with extended erector housings, such as the US Optics TPAL/EREK and the Nightforce BEAST.

Technical Features: