Monstrum T1 Micro mount for Benelli shotguns

This Monstrum mount is designed for fitting an Aimpoint or similar sight to a Benelli shotgun. It will fit:

• Aimpont Micro T1, T2, H1, H2
• Vortex Crossfire
• Sig Romeo 4, 5
• Holosun 403, 503, 515, 530

It is stock number ZD145A, and is getting hard to find these days. It will provide absolute co-witnessing to most factory Benelli ghost ring sights. While some people prefer lower-third co-witness by mounting their Aimpoint Micro or Vortex Crossfire on a picatinny rail, others like absolute co-witness because your head is in a more natural position on the stock and you can see your iron sights as backup through the glass.

It will fit:

• Benelli Super Black Eagle
• Super Black Eagle II (.335" OAL screws)
• Super Black Eagle III (.335" OAL screws)
• Benelli M1, M2, M3, M4 (and M4 clones with 89mm screw spacing, front to back)
• Benelli Nova, SuperNova

This mount is new in the box, and was bought for an M4 that got sold before installation.

 NOTE: It does NOT fit a Benelli Nova 3 as screw spacing is different and these receivers are shorter than the M4, Nova and SuperNova receivers. To check for certain, screw spacing on this mount and my M4 is 89mm from front screw to back screw. 

NOTE: On shotguns with curved receivers and no flat on top such as the M4, it will overhang the receiver as the bottom of this mount is FLAT in order to have the lowest mount possible for absolute co-witnessing with your backup iron sights. If this is not esthetically pleasing, please do not buy the Monstrum mount. Scalarworks makes a nice quality mount that has a bit of a curve on the bottom (at four times to price.)

Pick up in Winnipeg area, or will ship for cost (with tracking on Canada Post, about $23.)