FN BAR MODEL D 7.62 x 51mm barrel and parts.

Will stay up until June 22 and then off to the auction.

I have not looked at these parts in 15 years or more and my description/nomenclature  may be slightly off.

 The pictures show all the pieces. 

You will only get the $600.00 deal if you take all the parts.

So this barrel and the parts are from a BAR Model D. This rifle had the clockwork trigger assembly that allowed for two rates of full auto fire.

The trigger assembly was the prized part. The rifle could not be imported into Canada as a full auto (post 1978). The government and the importer (s) solved this problem by having the gas system disabled leaving the "clockwork trigger assembly" intact.

 The gas ports on the barrel were welded closed the gas piston was separated from the action and the gas tube was indented. (IIRC) This was done to every rifle allowed into Canada, legally.

The above "alterations" produced a single shot bolt action rifle.

First the barrel. Internally it is in good condition. The rifling is bright and shiny with no corrosion. The exterior has some marks and has a white line painted under the cooling fins. You can also see weld marks where the gas assembly is pinned to the barrel.

Next is the gas tube, gas piston and the action/bolt carrier.?? All are in good + condition and should be fully functional.

The bolt follows and it is complete and should also be fully functional.

Then we have have the cocking piece and a dust cover.

Lastly are some miscellaneous parts.

I do not have any mags and I do not remember if the rifle used FN FAL mags.

I do not believe that there are any parts above that need a PAL other than the barrel.

EMT is good and shipping/insurance is on the buyer.

Please no trades. Unless you have a XII.II Browning Heavy Barrel .50 cal. MG

If I have forgotten anything or you have questions please feel free to contact me.

Thanks

Roy

May 22