Antique HR Model 1 1/2. (4 Videos)

Antique . No pal. No registration. 32 RF long. 5 shot. Super thick walled barrel. Fully functional. Lockup is good-very good unloaded and excellent upon hammer drop on a cartridge. Timing is good. Bore is sexy. Shootable with caution due to age. No safety guarantees. Shoots as shown. 

https://youtube.com/shorts/UW57em37RqM?si=_rFeQy2lmENuKQrB

1878-1883 production only 10,000 made. 

Has half and full cocked. 👇 & Dents brass nicely. 

https://youtube.com/shorts/b9g89s47wFc?si=ZeecpkkVzQvgskAW

Yes the cyl stop pin is a finish nail. Had no need or desire to swap it out since it's working, stays in tight sideways and upside down. 

$600 shipped with antique RCMP papers included. Retail on an HR antique is usually $700+ as they are better made than most. 

Approx 80-85% nickel. Some powder residue or surface level rust which should come off with polish/ grease & 220/320 or 0000 steel wool or a buffing wheel 400-800 grit wet sand. 

Only the bore & chambers were cleaned with cotton balls and grease. No solvent. Exterior not sanded or polished or buffed at all, just lightly wiped with steel wool. 

Right grip repaired with black epoxy as it had an edge missing. Solid overall. Grip screw removes easily, grips seem slightly stuck. 

Third viewing video 👇 

https://youtube.com/shorts/C3mGSvA5WkU?si=EdFh2TZGLLUQJH5c

Buy Now Only. Payment Etransfer. 

Not looking for offers, sorry. 

Rimfire reloading is easy a 10 yo can do it. 👇 

https://youtube.com/shorts/PbCqBviS0aE?si=7oIAIOLlByf0pFTO

Buyers: Less than 5 Reviews = Proof of Age required, PAL or Drivers. 

More than 5 reviews: Nothing needed. Trusted adult member.