Bubbafied Chinese SKS (mostly matching)
- Category
- Firearms Rifles
- Classification
- Non-restricted
- Action
- Semi-automatic
- Condition
- Very Good
- Manufacturer
- Norinco
- Caliber
- 7.62x39
- Hand
- Right Handed or Ambidextrous
- Model
- SKS
Will ship everything pictured for $800 flat. This is an export-made Chinese SKS (it probably hasn't seen military use). Almost everything matches, though I couldn't find serials on the gas tube and stock. I'll go over the mods in below:
The barrel has been chopped to 18 3/4" and re-crowned flat.
The front sight has been chopped and press-fit further back with Loctite 609 to accommodate the shorter length.
M14- (AK pattern) threads have been cut onto the end and an AK slant brake is held in place with a jamnut.
The bolt-free mod has been done to allow magazine swaps without holding the bolt back.
The take-down lever has been removed and replaced with a 1/4" trailer hitch pin that is compatible with any rail systems you might want to use.
You'll also get a nice recoil pad on the end for cushioning recoil and increasing the length of pull.
FULL DISCLOSURE: The threads are pretty damn non-concentric with an obvious 5 degree upward slant on everything you install, as you can see in that last pic. It still shoots perfectly straight but that slant is totally visible by the naked eye if you install anything long on the end. You'll almost definitely get a baffle strike if you install a tighter brake or mock suppressor.
