NR Stevens Crackshot 16 ( Project or Parts)
- Category
- Firearms Rifles
- Classification
- Non-restricted
- Action
- Single-shot
- Condition
- Very Good
- Manufacturer
- Stevens
- Caliber
- 22 LR
- Capacity
- 1
- Hand
- Right Handed or Ambidextrous
Non restricted. Barreled action. Stevens original receiver. Rebarreled with a VG-E barrel that is 2-3 decades newer than the receiver. Project or parts gun. Sold as is. Rim needs recut, can be done for $30 extra to 22LR or do it yourself.
$90 AS It is now ,OR $120 with the rim recut to 22 LR or 22MAG with a 22WRF intention . Any shipping is YOUR COST.
Barrel exterior bluing is 90-97%. Very good if not excellent rifling and bore.
Barrel appears to need to be set back 1/16 or 1/32" to eliminate slight up and down play and allow it flush at the barrel shoulder and receiver . Maybe it could be left as is, not sure it's very close. Perhaps red lock tight would be sufficient on the barrel shank or some solder on the barrel shoulder or a quick clean up of the barrel shank & face on a lathe 1/16" or less, 5 min job.
Receiver appears to have 2-3 old gouges filled with weld and reblued (1/4" or smaller areas) can't guarantee it just think so. No cracks. No safety concerns that I can tell, other than potential heat treat issues which are minimal as most of the pressure happens on the block and inside the barrel. 22LR & 22WRF are low pressure rounds anyhow.
I own over 6 of these so no use for this one. In a variety of calibers.
Non restricted PAL, DOB & email required to purchase. Made 1910-1925. Not antique class. License will be verified before shipping or meeting.
**Will not be meeting for looky loos to view it. If you want it. Send funds. It's cheap. Barrel alone is worth $90, receivers usually sell for $15-30.
Final sale. No return. No exchange.
Described accordingly. Good for a build or to rebarrel your 25 Stevens or 32 cal rf to a 22 RF or maybe even a 22WRF by using a 22 mag reamer and shooting 22 WRF which is a lower pressure round. Only caveat is most modern 22WRF is copper cased.
Payment: Etransfer only.
Very likely will be selling 2-3 more of this exact model as I've lost interest in reassembling or rebuilding multiples of the same model. Pain in my ass
Plan to move in a few months so there will be plenty of non restricted posted between. $90-190 at a fire sale price to get it the hell out of here.
