Heavily Bubbafied Hical SKS (and extras)

The mods alone go for like $1500 before tax, shipping, labor, etc. I'll ship it all to you for $2100 flat. You'll get everything pictured except the bag and bullets.

This is a Chinese SKS that has been painted and dressed in a FAB Defense shock absorbing stock along with every bell and whistle I could get my hands on. Unlike the SKS-15 this can still be clip-fed and field stripped without tools. The Hical adapter allows you to use legal 10 round XCR magazines which can be fed with the *entire* stripper clip. I'll try to go over everything else below:

The barrel has been chopped to 18 3/4 inches, threaded with M14 counter clockwise threads (AK pattern threads), and the front sight has been replaced with a Bullet Button Front Sight to accommodate the shorter length. A VG6 Epsilon AK Brake and jamnut is currently sitting on the end to reduce muzzle flip (at the cost of your neighbors hearing). You will also get the optional VG6 concussion Cage to reduce the muzzle blast at the range.

It has a Magwedge 3.1 rail which is notched to allow use of the irons. The rail itself has been shimmed to reduce the wiggle room in the front sight block, and is held in place with a machine screw in the front, and a 1/4" trailer hitch pin in the back which I've found to be much easier to deal with than the Kwik Pin it came with.

I have a Feyachi red dot+magnifier combo mounted for close/medium range shooting without getting in the way of ejection and stripper clip feeding. You'll get 4 SKS ergo clips which are necessary to help overcome the higher spring tension in the XCR magazines during reloads.

Of course you'll also get the extra rail section that covers the clip feeding path if you want to mount a bigger optic or just swap mags for reloads instead. I personally think clip reloading is the biggest charm of the rifle but it'll come with an extra 10/10 XCR magazine and a 5/30 magazine if you want to go that path.

The reciever and FAB Stock has been paintstakingly routed out with a dremel to allow space for the larger XCR magazines (shown in pic 3). The drop-free bolt mod has also been done to allow you to reload magazines without holding the bolt back (shown in pic 5).

I made the trigger pull a little lighter by installing a 2.5lb sear spring. You'll get the default 4lb spring it came with if you prefer the heavier pull for some reason.

DM for more details if interested.